Products
3500Ton High Pressure Aluminium Alloy Cold Chamber Die Casting Machine
Hichtepunten
1. Hegere prestaasjes
Air shot snelheid ≥ 8m / s, yntinsivearring druk gebou tiid ≤ 15ms, slow-fast ynjeksje switching tiid ≤25ms. De masine is geskikt foar aluminium en magnesium.
2. Hegere effisjinsje
It ynjeksjesysteem en ekstreem snelle klemsysteem, boud neffens it nije strukturele ûntwerp fan avansearre bûtenlânske die-casting-masines, binne folle betrouberer as tradisjonele die-casting-masines en berikke hege snelheid produksje en hegere útfier.
3. Hegere stabiliteit
De kaai ienheden fan 'e die casting masine, lykas it ynjeksje systeem, krekt oanmakke neffens de strukturele en prosessen ûntwerp fan ferneamde bûtenlânske die casting masines, hat hege rigidity, hege betrouberens en hege duorsumens en is oanpasber oan ûngeunstige bestjoeringssysteem omjouwing te realisearje hege stabile produksje.
Features
Superior ynjeksjesysteem
Yomato's superieure net-driuwende piston-ynjeksjesysteem hat in leech steuringsnivo, ynboude ienwize-klepkontrôle, ferkoart de drukopboutiid en soarget foar goede stabiliteit.
Sintraal Lubrication System
De skeakels binne foarsjoen fan in automatysk sintraal smeersysteem dat aparte oanpassingen fan it smeerynterval en oaljevolumint mooglik makket en de lifespan en betrouberens fan 'e masine ferbettert.
Sintraal Lubrication System
De skeakels binne foarsjoen fan in automatysk sintraal smeersysteem dat aparte oanpassingen fan it smeerynterval en oaljevolumint mooglik makket en de lifespan en betrouberens fan 'e masine ferbettert.
Precise Hydraulic Control System
Multi-level elektrysk eksploitearre proporsjonele druk en stream kontrôle, likegoed as lege-druk skimmel beskerming is beskikber; Orizjinele ymportearre hege prestaasjes, lege lûd dual vane pomp út Japan; Elektromagnetyske fentyl, Elektryske hydraulyske fentyl.
Stabile elektryske kontrôlesysteem
It ORMON PLC-kontrôlesysteem (touchscreen) is feilich en betrouber mei hege kontrôlenauwkeurigens. Separate yntegraasje fan 'e elektryske en elektroanyske systemen fersterket effektyf de stabiliteit fan' e elektryske sirkwy.
Enerzjybesparend servosysteem (opsjoneel apparaat)
Yomato die casting masine leverje it servosysteem foar masine enerzjybesparring as opsjoneel.
Servomotor: Hilectro (ferneamd merk fan Sina) + Servopomp: Sumitomo-merk + Servo-bestjoerder: MODROL.
Of oanpaste meitsjen ûnder spesjale easken merken.
| Model | Ienheid | MT130 | MT160 | MT200 |
| Clamping Unit | ||||
| Klemkracht | KN | 1300 | 1600 | 2000 |
| Platengrutte (HxV) | mm | 680×680 | 680×680 | 760×740 |
| Romte Tusken Tie Bars (HxV) |
mm | 430×430 | 460×460 | 490×490 |
| Tie Bar Diameter | mm | 75 | 85 | 90 |
| Mouldhichte (min.-max.) | mm | 250-500 | 200-550 | 200-550 |
| Klemslag | mm | 350 | 360 | 380 |
| Ejection Stroke | mm | 80 | 80 | 80 |
| Ejection Force | KN | 100 | 100 | 130 |
| Injection Unit | ||||
| Injection Force | KN | 94-180 | 220 | 230 |
| Ynjeksje Stroke | mm | 340 | 345 | 350 |
| Injection Posysje | mm | 0,-100 | 0,-140 | 0,-140 |
| Ynjeksje Plunger Diameter | mm | 40,50,60 | 40,50,60 | 50,60,70 |
| Ynjeksjegewicht (Al) | KG | 0.7,1.2,1.7 | 0.7,1.2,1.7 | 1.2, 1.8, 2.4 |
| Casting Pressure (yntinsiver.) | MPa | 143-63 | 175,112,77 | 117,81,59 |
| Casting Area | cm2 | 88-204 | 91.142.205 | 170.245.334 |
| Max. Casting Area (40MPa) | cm2 | 325 | 400 | 500 |
| Casting Flange Protrusion | mm | 10-0,05 | 10-0,05 | 10-0,05 |
| Casting Flange Diameter | mm | 110 | 110 | 110 |
| Plunger penetraasje | mm | 125 | 125 | 125 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 14 | 14 | 14 |
| Motor Power | KW | 11 | 11 | 15 |
| Oalje Tank Kapasiteit | L | 400 | 450 | 500 |
| Machine Gewicht | KG | 4700 | 6400 | 7700 |
| Machine Ofmjittings (LxWxH) |
m | 5.0×1.4×2.5 | 5.2×1.4×2.5 | 5,5 × 1,6 × 2,6 |
| Model | Ienheid | MT230 | MT258 | MT300 |
| Clamping Unit | ||||
| Klemkracht | KN | 2300 | 2600 | 3000 |
| Platengrutte (HxV) | mm | 780×780 | 820×820 | 870×870 |
| Romte Tusken Tie Bars (HxV) |
mm | 510×510 | 530×530 | 570×570 |
| Tie Bar Diameter | mm | 95 | 100 | 110 |
| Mouldhichte (min.-max.) | mm | 200-600 | 250-600 | 250-650 |
| Klemslag | mm | 400 | 430 | 460 |
| Ejection Stroke | mm | 90 | 90 | 110 |
| Ejection Force | KN | 130 | 130 | 140 |
| Injection Unit | ||||
| Injection Force | KN | 250 | 280 | 320 |
| Ynjeksje Stroke | mm | 370 | 380 | 420 |
| Injection Posysje | mm | 0,-140 | 0,-140 | 0,-160 |
| Ynjeksje Plunger Diameter | mm | 50,60,70 | 50,60,70 | 50,60,70 |
| Ynjeksjegewicht (Al) | KG | 1.3,1.9,2.6 | 1.3,1.9,2.6 | 1.5, 2.1, 2.9 |
| Casting Pressure (yntinsiver.) | MPa | 127,88,64 | 142,99,72 | 162,113,83 |
| Casting Area | cm2 | 180.260.354 | 182.262.357 | 184.265.360 |
| Max. Casting Area (40MPa) | cm2 | 575 | 650 | 750 |
| Casting Flange Protrusion | mm | 10-0,05 | 10-0,05 | 12-0.05 |
| Casting Flange Diameter | mm | 110 | 110 | 110 |
| Plunger penetraasje | mm | 145 | 155 | 150 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 14 | 14 | 14 |
| Motor Power | KW | 15 | 15 | 18.5 |
| Oalje Tank Kapasiteit | L | 550 | 600 | 650 |
| Machine Gewicht | KG | 8800 | 9300 | 12000 |
| Machine Ofmjittings (LxWxH) |
m | 5.7×1.6×2.6 | 6×1.7×2.7 | 6.2×1.8×2.7 |
| Model | Ienheid | MT350 | MT400 | MT450 |
| Clamping Unit | ||||
| Klemkracht | KN | 3500 | 4000 | 4500 |
| Platengrutte (HxV) | mm | 960×960 | 970×960 | 1010×1010 |
| Space Between Tie Bars (HxV) | mm | 610×610 | 620×620 | 660×660 |
| Tie Bar Diameter | mm | 120 | 130 | 130 |
| Mouldhichte (min.-max.) | mm | 250-700 | 300-700 | 300-750 |
| Klemslag | mm | 500 | 550 | 550 |
| Ejection Stroke | mm | 120 | 120 | 120 |
| Ejection Force | KN | 160 | 180 | 200 |
| Injection Unit | ||||
| Injection Force | KN | 370 | 405 | 420 |
| Ynjeksje Stroke | mm | 500 | 500 | 520 |
| Injection Posysje | mm | 0,160 | 0,-175 | 0.-200 |
| Ynjeksje Plunger Diameter | mm | 60,70,80 | 60,70,80 | 60,70,80 |
| Ynjeksjegewicht (Al) | KG | 2.6,3,6,4,6 | 2.6,3,6,4.6 | 2.8,3.6,4.7 |
| Casting Pressure (yntinsiver.) | MPa | 130,96,73 | 143,105,80 | 148,109,83 |
| Casting Area | cm2 | 267.364.475 | 279.380.496 | 302.412.538 |
| Max. Casting Area (40MPa) | cm2 | 875 | 1000 | 1125 |
| Casting Flange Protrusion | mm | 12-0.05 | 12-0.05 | 15-0,05 |
| Casting Flange Diameter | mm | 110 | 110 | 130 |
| Plunger penetraasje | mm | 195 | 200 | 220 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 16 | 14 | 16 |
| Motor Power | KW | 22 | 22 | 22 |
| Oalje Tank Kapasiteit | L | 700 | 850 | 1000 |
| Machine Gewicht | KG | 14800 | 15000 | 18000 |
| Machine Ofmjittings (LxWxH) | m | 7×1.9×2.8 | 7x2x2,8 | 7x2x2,9 |
| Model | Ienheid | MT550 | MT700 | MT850 |
| Clamping Unit | ||||
| Klemkracht | KN | 5500 | 7000 | 8500 |
| Platengrutte (HxV) | mm | 1150×1150 | 1260×1250 | 1400×1400 |
| Space Between Tie Bars (HxV) | mm | 760×760 | 820×820 | 925×925 |
| Tie Bar Diameter | mm | 140 | 165 | 185 |
| Mouldhichte (min.-max.) | mm | 320-800 | 350-900 | 400-950 |
| Klemslag | mm | 580 | 650 | 760 |
| Ejection Stroke | mm | 120 | 160 | 180 |
| Ejection Force | KN | 220 | 260 | 360 |
| Injection Unit | ||||
| Injection Force | KN | 520 | 620 | 750 |
| Ynjeksje Stroke | mm | 570 | 650 | 750 |
| Injection Posysje | mm | 0.-200 | 0,-250 | 0,-250 |
| Ynjeksje Plunger Diameter | mm | 70,80,90 | 80,90,110 | 80-120 |
| Ynjeksjegewicht (Al) | KG | 3.9,5.1,6.5 | 6.1,7.8,9.6 | 7–16 |
| Casting Pressure (yntinsiver.) | MPa | 135,103,81 | 123,97,79 | 149-66 |
| Casting Area | cm2 | 407.531.672 | 567.718.886 | 570-1287 |
| Max. Casting Area (40MPa) | cm2 | 1375 | 1750 | 2125 |
| Casting Flange Protrusion | mm | 15-0,05 | 15-0,05 | 20-0,05 |
| Casting Flange Diameter | mm | 130 | 165 | 180 |
| Plunger penetraasje | mm | 230 | 280 | 300 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 16 | 16 | 16 |
| Motor Power | KW | 30 | 37 | 37 |
| Oalje Tank Kapasiteit | L | 1100 | 1200 | 1400 |
| Machine Gewicht | KG | 23500 | 30000 | 39500 |
| Machine Ofmjittings (LxWxH) | m | 7.8×2.4×3.1 | 8.2×2.5×3.3 | 9.4×2.6×3.6 |
| Model | Ienheid | MT950 | MT1100 | MT1300 |
| Clamping Unit | ||||
| Klemkracht | KN | 9500 | 11000 | 13000 |
| Platengrutte (HxV) | mm | 1480×1480 | 1620×1600 | 1780×1770 |
| Space Between Tie Bars (HxV) | mm | 980×980 | 1050×1050 | 1100×1100 |
| Tie Bar Diameter | mm | 190 | 210 | 230 |
| Mouldhichte (min.-max.) | mm | 400-950 | 450-1150 | 550-1200 |
| Klemslag | mm | 800 | 900 | 1000 |
| Ejection Stroke | mm | 180 | 190 | 200 |
| Ejection Force | KN | 260 | 500 | 570 |
| Injection Unit | ||||
| Injection Force | KN | 800 | 900 | 1100 |
| Ynjeksje Stroke | mm | 800 | 900 | 950 |
| Injection Posysje | mm | 0,-250 | 0,-300 | 0,-320 |
| Ynjeksje Plunger Diameter | mm | 90-130 | 90-130 | 100-140 |
| Ynjeksjegewicht (Al) | KG | 9.1-19 | 10.3-21.6 | 13.5-26 |
| Casting Pressure (yntinsiver.) | MPa | 125-60,3 | 141-67 | 140-71 |
| Casting Area | cm2 | 755-1575 | 777-1622 | 925-1815 |
| Max. Casting Area (40MPa) | cm2 | 2375 | 2750 | 3250 |
| Casting Flange Protrusion | mm | 20-0,05 | 20-0,05 | 25-0,05 |
| Casting Flange Diameter | mm | 190 | 240 | 240 |
| Plunger penetraasje | mm | 350 | 350 | 350 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 16 | 16 | 16 |
| Motor Power | KW | 45 | 55 | 74 |
| Oalje Tank Kapasiteit | L | 1500 | 1800 | 2200 |
| Machine Gewicht | KG | 48000 | 70000 | 90000 |
| Machine Ofmjittings (LxWxH) | m | 9.6×2.5×3.6 | 11,2 × 3,4 × 4 | 12,5 × 3,5 × 4 |
| Model | Ienheid | MT1600 | MT2000 | MT2500 |
| Clamping Unit | ||||
| Klemkracht | KN | 16000 | 20000 | 25000 |
| Platengrutte (HxV) | mm | 2000×2000 | 2150×2150 | 2350×2350 |
| Space Between Tie Bars (HxV) | mm | 1250×1250 | 1350×1350 | 1500×1500 |
| Tie Bar Diameter | mm | 260 | 290 | 330 |
| Mouldhichte (min.-max.) | mm | 550-1350 | 650-1600 | 750-1800 |
| Klemslag | mm | 1000 | 1400 | 1500 |
| Ejection Stroke | mm | 250 | 300 | 320 |
| Ejection Force | KN | 600 | 650 | 800 |
| Injection Unit | ||||
| Injection Force | KN | 1280 | 1500 | 1800 |
| Ynjeksje Stroke | mm | 980 | 1050 | 1100 |
| Injection Posysje | mm | 0,-350 | 0,-350 | - 200, - 400 |
| Ynjeksje Plunger Diameter | mm | 110-150 | 120-160 | 140-180 |
| Ynjeksjegewicht (Al) | KG | 17.2-32 | 22-38 | 31-59 |
| Casting Pressure (yntinsiver.) | MPa | 134-72 | 132-74 | 116-70 |
| Casting Area | cm2 | 1185-2205 | 1505-2680 | 2138-3534 |
| Max. Casting Area (40MPa) | cm2 | 4000 | 5000 | 6250 |
| Casting Flange Protrusion | mm | 25-0,05 | 25-0,05 | 30-0,05 |
| Casting Flange Diameter | mm | 260 | 260 | 280 |
| Plunger penetraasje | mm | 380 | 450 | 500 |
| Oaren | ||||
| Systeem wurkdruk | MPa | 16 | 16 | 16 |
| Motor Power | KW | 90 | 110 | 135 |
| Oalje Tank Kapasiteit | L | 2500 | 3000 | 3400 |
| Machine Gewicht | KG | 105000 | 130000 | 180000 |
| Machine Ofmjittings (LxWxH) | m | 13x4x4.2 | 14×4.2×4.5 | 14.8×4.8×4.6 |
| Model | Ienheid | MT3000 | MT3500 |
| Clamping Unit | |||
| Klemkracht | KN | 30000 | 35000 |
| Platengrutte (HxV) | mm | 2650×2650 | 2800×2800 |
| Space Between Tie Bars (HxV) | mm | 1650×1650 | 1750×1750 |
| Tie Bar Diameter | mm | 350 | 360 |
| Mouldhichte (min.-max.) | mm | 800-2000 | 850-2000 |
| Klemslag | mm | 1500 | 1600 |
| Ejection Stroke | mm | 320 | 320 |
| Ejection Force | KN | 900 | 900 |
| Injection Unit | |||
| Injection Force | KN | 2100 | 2400 |
| Ynjeksje Stroke | mm | 1150 | 1400 |
| Injection Posysje | mm | - 250, - 450 | - 300, - 600 |
| Ynjeksje Plunger Diameter | mm | 150-190 | 160-200 |
| Ynjeksjegewicht (Al) | KG | 37-60 | 52-83 |
| Casting Pressure (yntinsiver.) | MPa | 118-74 | 120-77 |
| Casting Area | cm2 | 2520-4050 | 2900-4540 |
| Max. Casting Area (40MPa) | cm2 | 7500 | 8750 |
| Casting Flange Protrusion | mm | 30-0,05 | 35-0,05 |
| Casting Flange Diameter | mm | 280 | 320 |
| Plunger penetraasje | mm | 550 | 600 |
| Oaren | |||
| Systeem wurkdruk | MPa | 16 | 16 |
| Motor Power | KW | 165 | 220 |
| Oalje Tank Kapasiteit | L | 3600 | 4600 |
| Machine Gewicht | KG | 220000 | 250000 |
| Machine Ofmjittings (LxWxH) | m | 15,8x5x4,8 | 16×5.38×5.3 |
| Us die casting masine wurde wyld brûkt foar de auto yndustry, motorfyts yndustry, kommunikaasje yndustry, keuken cookware, strjitte lamp yndustry, etc.The wichtichste grûnstoffen brûkt binne aluminium alloy, koper alloy, magnesium alloy. | |||
 |
 |
 |
 |
| Auto-ûnderdielen, motordeksel en fersnellingsbak, koppeling en stjoer, ensfh. | |||
 |
 |
 |
 |
| Motorcycle Parts | 5G Communication Parts | ||
 |
 |
 |
 |
| Cookware | Lighting Yndustry | ||
 |
 |
 |
 |
| Radiator dielen | Elevator Fuotstap | ||
